If you are concerned about limited roof area or shading we can arrange for someone to visit you.
Energy efficiency tips:
- Use compact fluorescent lights (CFLs) or LEDs instead of incandescent bulbs
- Avoid inefficient quartz halogen down lights
- Turn off your lights (including CFLs) when you are out of the room for longer than 5 minutes
- Turn off all of your appliances (at the wall) that have a standby function
- Ensure that fridges and freezers are set at the correct temperatures and that door seals are in good condition
- Use shading, cross ventilation and fans to minimise the use of air conditioning for cooling
- Buy energy efficient appliances
- Replace your electric hot water tank with a solar hot water system
- Install bulk insulation in your ceiling and walls, use curtains over windows and ensure you have adequate passive solar access in winter to minimise heating costs
- Utilise off-peak tariffs for large electrical appliances such as pool pumps and hot water
- Whether or not electricity is used during the daytime by your household.
- Your average daily electricity usage, written on the back of your electricity bill in kWh.
- The amount of roof space that you have available for solar panels.
- The budget for your particular Auzion system.
An average household using 20 to 25 kWh of electricity per day, using only a small amount of electricity during the daytime (e.g. to run a fridge and freezer) might expect a 1.4 kW system to reduce electricity costs by 40% to 50% per quarter.
A household that uses more electricity during the daytime might consider installing a larger system to enable some feed-in to the mains grid to take advantage of the high feed-in tariff.
The roof must have enough space for the panels:
- A 1.5 kW system takes up 6.5 metres x 1.6 metres or 3.5 metres x 3.5 metres.
- A 2.2 kW system takes up 10 metres x 1.6 metres or 5 metres x 3.5 metres.
- A 3.0 kW system takes up 13 metres x 1.6 metres or 6.5 metres x 3.5 metres.
The roof must have minimal or no shade covering it. If there are trees or adjacent buildings casting shadows across your roof, it may not be suitable for a solar installation.
- Make sure your solar panels are free of shadowy obstructions. Cut branches and trim bushes if they are blocking the sun.
- Clean your panels with water and a soft cloth regularly. Dust, bird droppings, and other debris can accumulate over time, reducing the efficiency of your solar panels.
- Install a flow control system if you are using your solar panel to heat up water. A flow control system helps reduce the amount of water which needs to be heated, allowing it to reach optimum temperatures more quickly.
- Ensure your panels are free from shading throughout the day, particularly from 9am to 3pm in summer
- Check your electricity account after your system has been installed to ensure you are being paid correctly
- Try to reduce your energy use during the day
- Consider load-shifting, whereby you use appliances that consume a lot of power (such as washing machines, desktop computers, electric heaters, irons etc.) outside of the main solar generating times (i.e. use these appliances in the morning or night time). This way you will be using mains electricity at the regular price rather than your solar-generated electricity which is worth up to 3 times more.
Energex or Ergon (the owners of the mains electricity infrastructure) will supply you with a bidirectional meter that measures what you use and what you supply back to the mains. Rates will vary between state showever you’ll consume electricity typically at a tarriff rate of approximately 19 c/kWh and ‘sell’ it back to the grid at a multiplier rate of between 2 and 3 times the purchase price (net). Your electricity bill will be credited with the amount of power that your system feeds into the mains grid.
Our lead time for installations is generally eight to twelve weeks.
Thank you.
- Firstly, the system provides power during the daytime, so you won’t need to draw electricity from the mains during this time (unless you’re using more than the panels generate).
- Secondly, any excess electricity generated by the panels is fed into the mains grid and your electricity bill will be credited for this power at the feed-in tariff (legislated at a minimum 44 c/kWh in Queensland).
We would recommend using electricity before 9:00 am and after 3:00 pm for large loads such as pool pumps, washing machines and ovens.
Please note that prices shown on Auzion’s contract form and website have already deducted applicable rebates and RECs.
Because of the differing physical attributes of some homes, some customers may have special requirements. The costs of these are outlined here and will also be made clear in the quote. Variation costs can include such things as:
- Tiled roof mounting brackets
- Double storey or difficult access to roof
- Tilt support brackets for flat, low pitched or steeply pitched roof
- Variance from standard panel array layout
- Weatherproof inverter or DC cabling to remote inverter
- Fire resistant back required for older style meter box
Once the installation is complete, your electricity supplier will provide you with a bidirectional meter. Within Queensland there is no charge for the first bidirectional meter supplied to a property.
Please note that prices shown on Auzion’s contract form and website have already deducted applicable rebates and RECs.
Please also be aware that, as a currency, The RECs market price fluctuates.
Find out more at www.orer.gov.au/publications/pubs/ret-thebasics-0909.pdf
We utilise a range of quality suppliers like CEEG, Ulica and Juli New Energy who are partnering with us here in Australia. Our suppliers products are exported all over the world to countries such as Spain, Germany, USA, Italy and Australia. They are tested in Australia to meet the toughest conditions and standards, and are registered for use here via the Clean Energy Council.
With Photovoltaic Solar Generator systems utilising an inverter to convert DC current to AC current RFI normally presents itself in the form of static when listening to an AM radio in close proximity to the inverter location.
Normal inverter installation requirements will minimise the potential for RFI however it may be necessary to relocate radio receivers away from the inverter if RFI is a problem and/or utilise an independent radio receiver aerial to improve signal strength of the receiver.